GODOX A1 Flash
Compatible Smartphone Models:
This ﬂash is compatible with the following smartphones e.g. iPhone 6s, iPhone 6s plus, iPhone7, iPhone7 plus, etc. (only lists the tested smartphone models, not all iPhones. For the compatibility of other camera models, a self-test is recommended).
Godox A1 ﬂash can serve as a ﬂash, as well as a controller to control all Godox ﬂashes and LED lights simply by operating the phone APP. With built-in Godox 2.4G wireless X system and lithium battery, A1 ﬂash can control all Godox ﬂashes’ TTL/M/ Multi mode. As A1 ﬂash has Auto mode, your shooting will become simpler. You can easily achieve a correct ﬂash exposure even in complex light-changing environments. With light and compact body, A1 ﬂash is portable and easy to be operated for it can control all ﬂashes and LED lights only through a phone.
Operation with phone APP: With built-in Bluetooth 4.0 Module and 50 meters' transmission distancewhich enables A1 to connect the mobile phone through Bluetooth, thus setting ﬂashes or LED video lights’ parameters on the APP interface.
OLED panel: with clear and convenient operation.
Built-in 2.4G wireless transmission: with all-in-one functions and 80 meters further transmission.
Built-in 433MHz wireless transmission: with abundant functions and 20 meters further transmission.
Lightweight and portable: Built-in lithium battery with no carriage burden.
Wireless control: With built-in Godox 2.4G wireless X system, A1 ﬂash can serve as a transmitter to control other ﬂashes, as well as wirelessly adjusting ﬂash power level and trigger the ﬂash through X1 ﬂash trigger. A1 ﬂash also has 2.5mm sync cord jack achieve various sync triggering mode.
5 steps of power output adjusts from 1/1 to 1/16
Stable color temperature at 6000±200K over the entire power range
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it.
Do not ﬁre the ﬂash directly into the eyes (especially those of babies) within short distances. Otherwise visual impairment may occur.
Do not use the ﬂash unit in the presence of ﬂammable gases, chemicals and other similar materials. In certain circumstances, these materials may be sensitive to the strong light emitting from this ﬂash unit and ﬁre or electromagnetic interference may result.
Do not leave or store the ﬂash unit if the ambient temperature reads over 50°C (e.g. in automobile). Otherwise the electronic parts may be damaged.
- 1 x A1 Flash
- 2 x Paster
- 1 x Type-C USB Cord
- 1 x Clean Cloth
|Guide No.||Fn = 8.1 (1/1 power output, ISO 100)|
|Darkroom, 3.3' / 1.0 m, 1/1 power output|
|Color Temperature||6000K ±200K|
|Power Output||5 levels, 1/16 to 1/1|
|Modeling Flash||1 W, 5600K ±200K|
|Sync||Voltage: 3 V|
|Current: 3 mA|
|Triggering Technology||2.5mm sync cord|
|Channel||2.4 GHz: 32 channels (1 to 32)|
|433 MHz: 16 channels (1 to 16)|
|Slave Mode||2.4 GHz: 16 channels (0 to 9, A to F)|
|433 MHz: 6 channels (A to F)|
|Charging Port||USB Type-C|
|Battery Type||3.8 V Lithium|
|Battery Capacity||1000 mAh|
|Flashes (Full Power)||Up to 700|
|Recycle Time||2.5 seconds|
|Current||Sleep: <8 mA|
|Whole Shutdown: <5 µA|
|Dimensions||3.1 x 2.6 x 0.9" / 8.0 x 6.5 x 2.3 cm|
|Weight||3.9 oz / 110.0 g|
|Package Weight||0.5 lb|
|Box Dimensions (LxWxH)||4.0 x 3.9 x 1.8"|